If you haven't studied the 'Eazy Rizer' menu option, please do so now - and then return to this page.
This section applies to any road going bike that has a duplex frame (twin chassis rails) slung below either side of the engine.
In particular this page deals with Harley Davidsons, the wide variety of Japanese Custom Bikes
and many of the Classics which are still in regular use.
EazyRizer's Beam Mounting brackets are designed to take full advantage of the wide-based
twin chassis frame layout to offer you a rock-solid method of raising these special bikes.
Despite the weight of many of these machines you can leave them in the raised position for as long as you like using Beam Mountings.
Beam Mounting Brackets
Click To Magnify
If you study the top-right Beam Mounting bracket you will notice 'hook bolts' attached to the beam.
It is those hook bolts that are slipped over the frames on either side of the bike that lock the bike solidly to the lift.
They can be seen clearly in the diagram below...
Here we can see the two Beam Mounting brackets located on the lifting arm. The brackets can be slid along the
arm to the ideal position to suit your bike, whereupon they are located by securing bolts. The slotted arrangement
in the bracket allows you to position the hook bolts to align precisely with your chassis rails. Please remember
that the top surface of the mounting brackets have a protective rubber pad to ensure that EazyRizer cannot possibly
damage or scratch your paintwork, and that the hook bolts are equipped with pvc sleeves to do likewise.
There is no metal to metal contact.
Once this operation is complete (done in a matter of seconds on either side) the bike can safely be raised to it's
full working height. Any size and weight of bike can be lifted in this manner, providing of course that it has a
duplex frame. Naturally this facilitates full wheel and suspension removal, not to mention 360 degree unrestricted
access to all of the bike's mechanicals.
There are no hydraulics to worry about.
EazyRizer was specifically designed to lift bikes of this size and its inherent failsafe characteristics mean that
the lift cannot possibly come down on its own - regardless of how long you leave it airborne. The wide-based layout
of duplex framed bikes offers the perfect opportunity to secure the bike to the lift it in absolute safety. You do
not use side stand when using Beam Mountings.
Precision engineering at its very best.
There are few bikes in the world that are heavier and more precious that the big Harleys, yet as the photograph below
shows, even a Harley Davidson poses no problem for EazyRizer.
No job is too big for EazyRizer!
Click To Magnify
Specialised Mounting Brackets
Whereas the vast majority of bikes can be lifted straight away by using combinations of our standard bracket sets,
we have introduced specialised mountings to overcome specific issues which affect certain bike makes and models.
With regard to Duplex Frame Bikes, if you own one of the following machines, please review the data relating to your bike.
Click For Valkyrie Mountings
Duplex frame bikes (twin chassis rail machines) with fittings that hang beneath
and within the rails and potentially make accessing the rails difficult.
EazyRizer's Best Friend
Click To Magnify
Page Top